How to maintain the air screwdriver head?

Release Date：2022-07-02

Pay attention to the following points during the maintenance of the air screwdriver head:

　　1.Confirm that the digital torque gauge must be within the validity period.

　　2.It cannot be used if it is not within the validity period.

　　3.Carry out three measurements and confirm that the middle value of the measured value is within ± 10% of the set value.

　　4.When setting the deviation, adjust the adjustment knob and measure again.

　　5.Refer to the user manual for torque measurement of digital torque meter.

　　6.When setting a new torque, adjust the adjustment knob as shown above for measurement.